Got some time in the workshop last weekend and did some front end work.
After searching high and low for a decent set of K3-K5 fork ears I found a set on Ebay. I de-rusted them, filled the small rust hole with JB Weld, painted the raw metal with silver paint and polished the chrome. Not perfect, but they turned out pretty good. Got the new fork gators on and put them on the bike.
Some how I lost those D washers that go in the tree top clamps around the legs. Found that they are about 2.25 mm thick, so I made some from some from some washers. I found a couple that were the right size and thickness and used the bench grinder to flatten one side.
Then I worked on the front brake. The caliper I had was in rough shape, so I ending up buying one from someone on another forum. They got powder coated, and I cleaned the insides real good and put in a new seal. I also polished off the bracket and mounted her up.
After doing this I noticed the brake line is in front, and the bleeder is in back. This caliper must be for the other side or something. Oh well, I'm leaving it for now, hoping the only difference is line and bleeder holes are switched.