Jorgy
CB750 Member
Hello everyone, I need a little help with my 71 CB750 K1
I pulled the carbs off and rebuilt them.
My embarrassing question is.. you have the cross over rubber tubing from carb 1-2 and one from 3-4 now that leaves the two in the middle. Is that just a bent piece of tubing?
Your help would much appreciated.
I pulled the carbs off and rebuilt them.
My embarrassing question is.. you have the cross over rubber tubing from carb 1-2 and one from 3-4 now that leaves the two in the middle. Is that just a bent piece of tubing?
Your help would much appreciated.