-
Enter the April CB750 Supply gift certificate giveaway! It's easy... Click here, post something, and you're entered into the drawing!
-
-
loxley007 replied to the thread Custom seat.Will do!! -
loxley007 replied to the thread Custom seat.Thanks, I managed to pick up a Motad Neta 4 into 1 from eBay for less than £80. It’s from the 80’s and I think it was from a CB750/900...
-
Hi all, I heading towards the end of my first ever build (cafe racer from a 79 750 Limited Edition). It’s been a huge learning curve as...
-
-
loxley007 replied to the thread GSXR front end swap - steering stop solution.Nice one. Glad I could help.
-
loxley007 replied to the thread Carb overflow.I had that. Turned out the previous owner had put it eBay type floats (fully plastic, not adjustable). I replaced them with adjustable...
-
loxley007 posted the thread GSXR front end swap - steering stop solution in The DOHC Garage (1979-1983).Hi all, In case this is going to be useful for anybody I wanted to post my fairly low cost solution to replacing the steering stops on a...
-
-
loxley007 replied to the thread Speedometer delete.That’s the solution I think.
-
loxley007 replied to the thread Exhausted….I still have the two sets of the original down pipes up until just after the join. You can see one in this image. They have cleaned up...
-
-
loxley007 replied to the thread Side stand/kick stand.I ended up chopping the side stand up and taking out a few mm. just need to paint/powder coat it.
-
-
loxley007 replied to the thread Speedometer delete.Not yet. I’ll have a look. Cheers.
-
loxley007 replied to the thread Speedometer delete.Yes!! I think I even wrote tach, deleted it and wrote speedo!!
-
Hi, is there a blanking plate or similar for the speedometer cable from the top of the rocker cover? I'm using a digital speedo rather...
-
loxley007 replied to the thread UK DVLA Examination.Watching with interest as I am about to start this process myself.
-
loxley007 replied to the thread DOHC engine re build.Hi, I don’t have any contacts for you but if I can give some encouragement. I started a full engine rebuild (engine was fully seized)...
-
loxley007 replied to the thread 1980 CB750 Runaway Idle.Thanks for the update. I think one of the rubber connectors between the air box and carb bank has worked its way party loose so it may...
-
loxley007 replied to the thread 1980 CB750 Runaway Idle.Can I jump in and ask how much of a difference having incorrect valve clearances would cause? Can it actually lead to runaway idle?
-
loxley007 replied to the thread Floats on a ‘79.Cheers all. I will look into that asap.
-
-
Loading…
-
Loading…
