gatorforge
CB750 Enthusiast
So while I'm gathering funds to do more work to the motor, I'm working on rebuilding my front suspension. I got it apart no problem, and got in springs and emulators from race tech and new seals from all-balls. I'm reassembling the forks now, and the first one went together like a dream. The second fork is having a bit of an issue with the dampening rod. When I screw in the allen bolt from the bottom, the dampening rod spins rather than allowing the screw to continue to thread in. I can get it 80% in, but the rod will spin and not allow the bolt to tighten all the way down. I have cleaned the threads with a brush and pick, and lubed the threads very lightly. Out of the fork, it screws in easily, but without being able to hold it, I can't tighten it down in the fork. Any advice would be appreciated.
Thanks,
Lance
Thanks,
Lance