Jarrett_Honda
CB750 Member
I get my carbs within 2 cmhg of each other which I believe is close enough. The bike idles between 1000 and 1200 rpm.
The bike is able to stop and start easily while the bike is warm. Once the engine cools I have trouble starting the bike without increasing the turns in the idle adjustment screw.
How do I adjust the carb to where the idle screw would be in the desired setting to provide enough air to start?
Everytime I make a change to the carbs the idle would drop or rise in which case I would adjust.
My timing is good
Electronic ignition
Compression good
New jets and clean carbs
Fresh fuel
New coils and spark plugs
The bike is able to stop and start easily while the bike is warm. Once the engine cools I have trouble starting the bike without increasing the turns in the idle adjustment screw.
How do I adjust the carb to where the idle screw would be in the desired setting to provide enough air to start?
Everytime I make a change to the carbs the idle would drop or rise in which case I would adjust.
My timing is good
Electronic ignition
Compression good
New jets and clean carbs
Fresh fuel
New coils and spark plugs