fabricating

I am looking to purchase a 1978 Honda CB750K in great condition but would like to put on one of my Honda SOHC 750 Super Sport tanks. Will it fit right onto the frame? My Super sport tanks that I have I believe are between 76 and 78'.

Hello. Just wanted to ask if anyone has had any experience with or has heard of a CB750 front end swap with Ducati Monster 600 forks? I know the gsxr and cbr swaps are the more popular ones. Its just that i might get my hands on Monster forks and was wondering if i could use them on my '78 cb750...

I've recently got into doing 3D printing and am experimenting with parts for my cafe build. I'm currently printing some seat spacer parts and next is making a post to put on my custom seat so I can lock it. I left the lock that's attached to the frame but the seat which has the male end is...

Good afternoon everyone! So, today I purchased a sport kit for my 750 (very excited!) as well as a set of rims and tires off of a Honda VFR. I believe it was a 750 as well but I can't be sure. I was wondering if anyone had success fitting these type of wheels onto a Cb750? I am already...

1st I plan on removing all the Xed out portions and cleaning up the goober welds. The previous owner tuned this into a hard-tail retaining the swing arm. If I cut out a section roughly between the lines and weld in shock mounts will it work. This is kinda what they did with the new Indian...

Have any of you guys done a baffle delete or bored out the inside of your exhaust. I'm thinking about doing something like this and would like to know what you guys have tried. Pictures if you have them.

Picked up a 1980 CB750 for $100. Runs, drives and has a clean title for once. Got it cheap because, well, it was UGLY and the guy lived in an apartment and had no way to fix it up. Had a couple little issues, throttle was hooked up backwards, carbs needed synced and again, it was ugly as sin...

short: What years/makes/models triple tree upper clamps with bolt onto my '80 CB750? Not worried about any mounting point for gauges or anything like that... long: Hey guys, I picked up a CB750 a couple weeks ago for $100 as I was bored and wanted to build a motorcycle. LOL I've built...

Quick check on sanity before I head down this path, but I have a 1978 CB750K with the fuel tank flap cover. I'm not a fan. So plan here is twofold. First, knock the tank in and down a bit for knee inserts and then (the tough part) I'm thinking take off the flap, remove the current fuel cap...

Hi guys, this is my first post in this forum but I use it regularly (only reading) till now... I wanted to know your toughts on placing a radiator on my CB750F 76 and eliminating the oil tank. Kind of using the radiator as the oil tank. I know the oil tank removal has already been discussed...

First of all I'd like to say hi, my name is Rick, and I'm an addict. I really enjoy these old motorcycles though I've been lucky enough over the last three years to skirt heavy electrical issues. I started riding when I was 17, and shifted my weight to older model bikes over the years. This is...

Hey, I have a '76 750f and one of my oil lines has started leaking. I don't know which one is the supply and which one is the return but they're both old and I'd like to replace the both so that shouldn't matter. my question is how hard is it to make new hoses from the ones I have? Like can I...

Ok, I have a great knowledge of engines and how they work. I've seen people using the Micro Squirt system on the CB750 before with success and I'm willing to take the leap. However, knowing how an automotive fuel injection works, there seems to be one key sensor missing for it to work (according...

I just bought this (81) Wondering if there are older more vintage looking tanks that will fit with minimal fab. This ones rusted inside and needs replacing anyway

Hey every one quick question I have a 1975 750f and my problem is there is no dipstick on the oil cap any suggestions where to find one on the cheap ought than flea bay? Was thinking about making my own but I'm not sure how long the stick is or where the hash marks would be on the stick Any...

First off let me say that I am by no means a chemist. If I had a chemistry class in High School, I don’t remember any of it. This is a summary of what I’ve read. Electroplating occurs in an electrolytic substance of free ions which are the carriers of electric current. Here this is, Epsom...

I'm away from my bike at the moment but would like to pick up some tube to bend my rear seat hoop. If i recall, my 78 cb has 1 1/8' OD. Can anyone confirm this? Does anyone know the ID on the frame? thanks

Ok, so im new to all this and i see tons of bikes with empty triangles, where on earth do they put things and where do the put the oil tanks? some of these guys say they ride their bikes daily and then i hear others say that they relocate the oil tank to the gas tank and im not willing to do...

After much consideration, I chose the fork-style Harbor Freight lift as a Christmas gift . It took about 20 minutes to bolt it together and it was ready for use. I wanted this type of lift so I could easily remove wheels or forks. But I also had looked at the table type of lifts so I...

im new to the 750 i do have a bobbed out xs650 love it .. i picked up 77 750 f for a good price.. fully sand blasted frame . swing arm. triples. motor is complete . cornstar wheels? . long flat tank... now i need direction.. im pretty sure i am not hardtailing this build.. any ideas?

I built these pipes for my chop. They are straight drags but can be built with collectors for 4-2 pipes that sound way different than what you're useed to. Cylinders 2&3 and 1&4 are paired together. This changes the firing order you hear from both sides of the bike, and aids in exhaust...

Now I know why my cush drive wont fit my hub. The dampers are for an A-model and/or a F2 Super Sport and my cush drive and hub is a regular K-model. The question is, can I somehow modify my dampers to fit my hub/cush drive, or do I have to get a set of new ones? They're pricey as hell over...

I thought I'd show you guys what I've been up to over the weekend (and a couple of nights last week). Last spring I got some heavy steel plates off of Craigslist to use as a top for a smallish welding/fixture table. Here's a picture of them on the temporary stand I made when I first got...