build

During the process of building my cafe bike, the LH tank emblem fell off, and over time, I lost it. I'm having a helluva time finding a replacement that costs less than $100 for just the one emblem anywhere online. Does anyone know if anything other than the OEM Super Sport badges will fit...

Howdy, does anyone know if a 79-82 CX500 seat will fit on a 79-82 CB750? Thanks! :)

Hey all, anyone know where to find a 2.15 x 18 inch spoked wheel? Thanks

Hey guys, here's a pic of my bike when I got it. I'm told it's a 1979, but the more I get into my build, it looks like a 1980. Can anyone tell me for sure what year it is?

Is the valve guide clip in the drawing for the 1976 CB750 F the one that's on the valve guide seal? Or is this another valve guide clip that goes on the guide somewhere? www.motobonita.com Thank you, Chris

Hello. First let me say that I'm brand new to the forums. My questions may have been addressed by someone in the past, but so far I haven't found them. I'm building a '78 CB750A at the moment. It will be a full custom job when I'm done, but right now it's a motor in a frame with other...

Hello, this is my first time tinkering with a motorcycle. I figured I would bring some of you guys for the ride. I apologize this is my first time on a forum so I may make a mistake or two. Little about my self. This is my second bike. The first being a 92 gsf400. Loved that bike pritty quick...

Hello All. Longtime stalker, first time poster. I am beginning a bobber project on a 1982 CB750SC and am wondering about lowering and ground clearance. I am ordering a Cycle One weld on hardtail which has a 5" standard ride height (they will do lower ride heights upon request). I understand this...

Started in November when my eldest son delivered a tired CB750K for me to Cafe for him over the winter. I have been retired now for 8 years and have taken up custom building of bikes in the garage. Been doing this for more than ten years as a hobby but now it's more than a hobby. I started a...

hello! is there somebody ho has a list of all bolts of honda cb 750 kz 1979 ? i do not whant to order them online i have a cheaper alternative...

After 2 years of blood and sweat, I got this baby (K3) on the road in the summer of 2015. Finally got some time to post some photos. Tuning has been a bit of a pain in the arse with the CR carbs and KN filters, but it felt pretty good at the end of the year before the snow hit the ground...

Fork: So I've seen a bunch of fork swaps and things and the gsxr seems to be prefered for this I there a specific reason for that? I'm assuming its got good suspension. Also, I was wondering what goes into a fork swap? What kind of things need to be changed or replaced? Like what come in the...

So I've seen a bunch of fork swaps and things and the gsxr seems to be prefered for this I there a specific reason for that? I'm assuming its got good suspension. Also, I was wondering what goes into a fork swap? What kind of things need to be changed or replaced? Like what come in the fork swap...

I know, another new member asking if he should buy a bike or not. Please bare with me as I really need some expertise. I've been pretty determined for a while now that I want to hunt down a CB750 for my own brat style build. I'm not a fabricator, but I can work on my own bikes down to the last...

Still in the initial stages of building my 78 cb750 and have some important decisions to make. I'm new to this forum and am immediately blown away by the amount of great info on here, kudos to you all. Style is obviously a subjective thing, but I am sure there are cardinal sins to watch out for...

Hey there. This is my first post. Ive got a bit of a long story. I bought my 81CB750K in 2010. The guy I bought it from had already done a pretty good Cafe Racer conversion (see photo). I liked it but immediately started looking at ways to make it better. Well, I went a few (or more) steps...

Hi, My father in law just gave me his old drag bike which is a 1974 CB750 (built). He use to drag it in the mid 90's but crashed on the track, so after his hospital stay he re built it and it stayed in the garage. I ride a 2009 Harley heritage so these older bikes are a new thing for me and...

Bought this bike about 2 weeks ago from an ol'dude who didn't know what he had, It fire'd right up, sounded great, no knocks, no weird noises, clean oil.. guys asking 1000.. so i offered him 500, he says 6 we agree to meet in the middle at $550.00! I was so stoked but had to hold it in. I had...

Hey, posted some more stuff on motobonita.com including assembly videos of: 1. Kickstarter 2. Transmission 3. Primary Sprocket 4. Shifter Assembly There are also some intro posts on what tools to buy, what documents to get, etc. for anyone getting started on a SOHC CB750. Thanks, Chris...

Build this bike a little over a year ago and finally have some time to post it up in this forum. Fairly knew to posting on forums. This build took me clost to a year to build and made sure I didn't cut corners. Focused in the importance of detailed work. Hopefully you enjoy.

As I'm just finishing up with my 75 cb750K (just need to get it painted, will do over winter), I started looking for my next project. I'm on a couple cb750 groups on Facebook and yesterday a guy posted an ad for 3 CB750 SOHC Basket cases. He's in the the next town over so I stopped by on my...

Just a quick question about the 1980 seat pan. Does anyone know if the custom and super sport seat pan where the same? I just bought a 1980 super sport with a custom seat. I want to get the seat reupholstered but it doesn't look like it fits 100% right.

Evening all. So previously I had owned sports bikes, but a career in the Army, playing rugby and going to the gym took a tole, so I have recently sold my 2000 Honda SP1 and picked up a pretty clean, running and MOT'd '78 CB750 SuperSport. I have decided to turn it into something fun. A...

Hey guys my first thread. Anyhow my 1980 750k hardtail chop decided to seize up. When i first got it the oil was full of metal and i knew it wouldnt last long (about 5 miles then seized). I have tried to find a dohc motor thats in good shape but have not been able to for my price range or it has...

First off, hello to all you CB750 gurus and wrenchers, glad to join the conversation over here on these beautiful bikes. I also appreciate in advance any and all help and advice, and hope I can help others moving forward, too. I bought a 1980 Cb750F as my first motorcycle, quite honestly with...

Does anyone know where I can get a new oem or aftermarket primary chain tensioner for a 79' limited? Honda PN: 23160-425-000

Hey! I have a 1983 CB750, and I'm looking to do a rebuild. Does anyone know if these gaskets will fit my bike? It says it fits '82 CB750 C/F/K models, but nothing about the '83 CB750 SC that I have. I thought they were the exact same engine? A different gasket kit here shows its good for '82...

Anyone have any input on these? stronger than the stock one's? I'm assuming so, but would they still be good for daily riding? http://www.ebay.com/itm/200817199455?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Hi, I'm completely new to the Honda world, and I want to build a bike like this one : I was wondering if this bike: would be a proper basis for it? If not, what other kinds would be appropriate for the project? The "target" bike was built from a honda cb750kz and the "source" one is a...

Can not figure out how to delete thread.