Dumbquestionguy
CB750 Member
I've been having problems lately with my bike over rpms when In lowers speeds it feels like it wants to keep creeping up and slipping so I decided to give my clutch a little adjustment now I'm scared I did it wrong any advice would help please and thank you. Ps. I first started by turning the nut on the lever all the way in it wouldn't release slack so I played with the one on the clutch case till there was slack then pulled my cap off and used a 10 mm socket to loosen it up then tightened the set screw down till it felt resistance then held it in place and tightened it with a lot with a contraption I made till the lock nut was tight again