A question, the front right brake hose, what is it connected to? It should go up to the forks to a connecting tube which connects both front brake hoses to the front brake master cylinder hose. Nice bike though.
PS. It's an awkward job but check your valve clearances. Very often they have not been checked for years and will have closed up. It's a known problem, DO NOT set them to the clearances in the manuals, set them between 4-5 thou. You may find they are less than 2 thou. Honda knew about the problem but did nothing about it. The manuals clearances will cause valve burn out. Check your compression pressures first. They should be 170-150 psi. Lower than that check those valve clearances BEFORE ripping the carbs off and/or the cylinder head.