frame

Hello I asked this question as part of my first post in the "Build" section. I noticed as part of my most recent tear down that on the left rear shock there is a sizeable "spacer" that appears welded to the frame. On the right side, there is a noticeably smaller spacer. Any chance this is...

I have just put up some information about stretch and drop on my website. Check it out under the information tab at http://www.davidbirdhardtails.com and let me know what you think. Thanks Dave

Hello everyone. I just purchased an 82 cb750c. Along with the bike I received hard bags and a hard tail pack with lights. Installed on the bike is a vetter windjammer with cd player and speakers, I'm curious to see what these are worth and if anyone on here would be interested in buying it...

HI there New man in the forum, so sorry if this is a noob question. I just bought a cb750 k '79, with a banged up gas tank. I want to replace is with a '75ish gas tank. Like attached. Does those gas tank fit, or do i have to do a lot of modifications? And cool forum by the way!! All the...

Bought my first bike and need to replace the chain and sprocket. Previous owner sent me an excel worksheet of parts needed and recommended the izumi chain(630x90, o-rings). Any reviews on them?

I'm going to attempt to change the front fork seals on my 1981 cb750c. Any secrets? I have the repair manual but it doesn't really show me anything other than the obvious. Any special tools or tricks? Will I need to "lift" the front end to get clearance to remove the forks?

Any secrets to changing front fork seals on an 81 750c?

Ok. I don't want to sound like a complete tool, but, I have a 81 CB 750 F with 82 CB 900 F front and rear suspension on it. What size rear tire can I go on the back, on the original Comstar, without any possible problems? This is my first attempt at building a bike from scratch. Basically have...

Hello Everyone My name is David Bird. I'm new here but not to motorcycles. I wanted to put up some pic's. of what I think is the best cb750 frame on the market. Please let me know what you think. Thanks David

Does anyone know of a alternative rear brake master cylinder? Mine has pretty bad rust and corrosion from years of setting. At this point i don't think rebuilding is an option. Does anyone know of another brake master cylinder that bolts up the same?

I noticed that the fork seals are leaking on my 1982 CB750C. While researching how to replace them I'm coming across things like progressive springs and valve emulators. Both sound like good ideas. Do any of you have any experiences or recommendations, good or bad, on the subject? I do only...

Ok while the motors waiting on parts I have a Smith Brothers Fetrow hardtail frame i want to install it in ,,whats my best choice on wheels ,,front end and if you have pic's of your builds please post em with details thanks L.T.

Help me out guys. If i need a whole new master cylinder let me know they are kinda cheap anyways. Obviously the resevoir of my 1981 cb750c fluid is at an angle but when I hook on for braking power it either doesn't work it takes me 3 pulls for it to actually stop. What should I do? Look for the...

SO i have a 1974 Honda cb750. I have done some work to it and now I am looking to put a front end on it. the one on it looks ridiculous and looks like a springer rip off, the previous owner kinda butchered it with random bolts and nuts here and there. So this nightmare has to be replaced. really...

So I am stripping my newly acquired 78, but the swingarm isn't budging. The bolt is out, so now does it just come out? Assuming that the cup looking things are dust cups/seals...help? lol

Was wondering if anyone had any experience with putting a newer front end on these old cb's I have a 1980 750c and didn't know if there were newer front ends that swap right out any info is helpful... Thanks

Hey guys so first post on here, im wanting to get some new handlebars i was thinking mini apes so that i can lean a little bit further back in the seat than the drag bars offer. if you would look at the pictures on my profile and let me know what you think. Ive never had apes my dad does he says...

Where can I find Blue Prints for Forward Controls, I am building a 71 750 Chopper

I want to install some rear sets for my 77 CB750K7. Quality is what I'm after. There seems to be a very limited availability for the 1977 K7. Am I wrong? Any pointers on which ones will fit as well as quality would be helpful. Thanks in advance, Sky

Any reason I have to go back with a O-ring style or do I have to stay with a 530 solid chain? Suggestions?

Looks like it may be a discontinued part but I was curious if anywhere sells new OEM or compatible aftermarket collars for the front wheel hub. thanks in advance.

I've become the new owner of a '76 cb750a. I am wanting to do a restomod cafe racer. What wheels will swap easily to change from spokes to solid?

I just picked up a CB750K over the weekend, and I'd love to get the CB750F wheels + disc brakes on my bike. Has anyone done this before? From the looks of it, I'll need the CB750F front forks as well (at a minimum) Any tips / tricks / limitations? Thanks!

Well I think I may have figured out my problem but I am looking for some expertise. So my 75 cb750 has a hondamatic 17 inch rear wheel. I have alignment problems. My question is, is the k5 drive hub shorter than the hondamatics? Can I get a k5 drive hub, spacer and swap that to my 17 inch...

Hello, I'm new to the forum. I've been working on a 1975 cb750 for the last month, I replace the swing arm bushings, thrust washers and felt seals. Once I got everything back together I notice my tire rubs on the RH side of the swing arm. I have a new chain. One thing I do know is that sometime...

Hello, I'm new to the forum. I've been working on a 1975 cb750 for the last month, I replace the swing arm bushings, thrust washers and felt seals. Once I got everything back together I notice my tire rubs on the RH side of the swing arm. I have a new chain. One thing I do know is that...

Can you show me close up pics of your rear sets, trying to decide on how to do mine,

Guys, I'm looking for a little help. My 74 CB 750 front brake always worked great. I went overseas for three years and get it back out of Dad's barn this spring and now the front brake is weak and it is leaking around the handle area. I took apart the caliper and such and it is in great shape. I...

About to start cutting my frame on my cb750 and was wondering if there is a good cheap brand out there I could use for pipe bending. Gonna need it to make my rear seat fit. Thanks

I have an opportunity to pick up a 1978 CB 750 K frame with title and also an 81 CB 750 solid running engine, my question is will it fit without modification or even heavy modification?