dohc

Honda CB750K 1980. Dissasembling the engine some small ball and washer drop from somewhere. I has not been able to find in any manual where they came from ( service manual / Haynes / Cymer). I need some help. I attach a picture. Best Regards

Will have to replace my valve cover gasket soon. Simple question....necessary to replace the 8 rubber setting washers too? Thanks.

I have a 1981 CB750k that I've recently put back together after disassembling for paint. I took it out for a short test ride, but it seemed to be very hesitant and sputtery when trying to open her up or accelerate. When i came back from the ride i noticed a small spot on the floor under the...

At some point after the riding season begins, I will have to replace my rear tire. Will save money and downtime by removing the wheel myself. Bike has the original 4 into 4 exhausts. Looks like left set of pipes will have to come off. If the axle is frozen, might have to remove the right set too...

Need a replacement fuel petcock or rebuild kit for a 1983 cb750sc. It leaks in the run position and reserve position. Does anybody know of a good source? I removed the vacuum from it so thats not an issue but I cant figure out what fits because nobody seems to have anything that lists...

Howdy ya'll I Purchased a 79' CB750K last spring and when I finally got it running n' driving I noticed that there was no fifth gear. Meaning, above 4th, it just didn't go anywhere. Did the research figured it was the shift drum stopper (maybe one of the pins fell out). I opened it up a few...

Need some assistance. 79 750F Super Sport. Has sat in dry storage since 1988. I'm rebuilding the wheel and master cylinders. The piston is STUCK in the rear master cylinder. I've taken everything apart but that. I was able to tap it to move it in the bore, hit the intake with air from my...

If I remove the cylinder heads to replace the gasket will it decrease the compression when I put it back together? My thinking is the rings are seated and if I remove the head it will mess up the seal. Are there any ways I can fix the leak without removing the head? I’ve heard of people using...

just painted the wheel, frame, tank waiting for the seat to be done and I order my tire 2 days ago , after my build will be complet link for the build http://www.cb750.com/threads/5468-new-member-and-owner-honda-cb750-82 lot of time, research and money but overall I more than happy of the...

My name is Greg. I own a 1979 Honda CB750K 10 year Limited Edition. I'm new to the forum but look forward to gaining much knowledge of my bike through the members of this forum.

looking for help posting my pics, any advice on file types, file size limits, ........ tried before without any success. just need some help to get me pointed in the right direction, thanks:cool:

Hi All, I'm new to the forum and have had several vintage bikes over the years. My pride and joy is a 73 Kawasaki H1 that I take to Barbers every year. Last year I sold my 82 750F and immediately regretted it so I found a replacement: a 82 900F (Black/Red)with 14K miles on it. Generally in...

Hi guru’s. Just scored a sweet little 79 750F. Been years since I’ve had a Honda, so I’m really rusty. Ordered a service manual but it won’t be here for a few more days. What’s this little gem leaking a black tar like substance on the battery? Also, how the heck do I get the little Phillips...

Bike has an aftermarket master cylinder, however, I have the original that needs to be cleaned and rebuilt. Having a problem removing the plastic reservoir. Appears that all the fasteners are removed, but the reservoir is stuck. Perhaps the large O-ring has bonded to the metal body. hesitate...

Is the oil seal behind the rotor coil serviceable without removing the motor and splitting the case? And is a minor oil leak/drip in this area detrimental to the coil, stater, or brushes? Any info or advice is appreciated. I just finishing up installing a new rotor, and stater coil, don't want...

Hi guys, I'm in the process of replacing seals on one of my front forks, I've measured the length of the fork spring, which is coming in at 525mm, according to my Haynes manual service limit on these is 551mm?? Seems like a massive amount of wear?? Can anyone confirm the service limit on...

I have a 1980 cb750c. Im trying to finish my engine build but I'm stuck putting the A-L cam holders on because Im missing one of the dowel pins that insert into the shaft and holder. But i have one extra long one for some reason. The short ones are 8x20 that Is the majority of them and this...

Hi guys - hope everyone had a good week. So the good news is I got the 1980 CB750F (speedometer indicates 31,000 miles +/-) back on the road after rebuilding the carbs and brakes and absolutely love it. Electrical system came up and it rides surprisingly well despite still needing everything...

Need a small amount of touch-up paint for the top portion of the tank. Believe one of the colors is R-104C-U Candy muse red, however, I think this is the lighter red color. Can't seem to find code or color for the darker tank top. Appreciate any help. Tanks!

My friend told me that Lacquer thinner is best thing to clean an engine,.? And I do work at a Car Wash Thats Heated So I thought about pressure washing Motor first,.,