Hi m8 can I ask how did you get the two very long bolts out of the engine to remove it . As iv loosened all the small one and taken out what I can but there is two long nut and bots at.the front and back the engine .I got one nut off the back one but I can't get the long bolt to slide all way...
Hi not trying to highjack your thread m8 but I'm looking in to new headbearings . And I can't find the ones that look like mine that's the same bike. age ..I found one set but they has rollers (think that's what there called ) instead of ball barings .
questions
1 does the part on bottom of...
Yea I went there a few times and I was always blown away with all the trucks this guy had no idea how he paid for all them lol there was some odd ball trucks too lol
Hi m8 I can't help on this one .as I can't see much wrong with it but if you feel the tyre you should feel bumps. If it's been sitting a long time mabye it sitting damaged the tyre not been used much ??
Watching this as I need to do my forks as one is leaking also iv taken them right off as I'm having them powerd coated to match the frame . (As cos there snowy affect pitted lol ) .
Yea mine has rare disk brake (rear) lol there quite new but I had the bike standing for a cupl years and it was all wrapped up so when I took the covers off the disks bit rusty now so iv tried to clean them and not coming up nice. I don't want to buy new ones as these are as I said no old but...
Hi m8 that's cool lol I have /had no idea about this till a day b4 you asked as I just taken mine off so I had a wee bit of an idea why I posted . This is the thing with this site iv asked and ppl have helped me so glad to return the favour m8 . I had no idea (still don't) or the confidence to...
Hi I just taken mine off on 750fn which I think is a bit like yours . If it is . Then you need to take off the nut washer then the headstock/handle bars up you then should see a large nut with some notches in it on mine there two undo the top one so you can tighten the lower one then tighten...
Do you have a local exhaust maker I'm lucky as there an stainless steel exhaust manufacturer just down the end of My est.. longlife stainless steel exhaust. I can say they are fantastic. Very helpfull and always glad to help.
Well got round to sorting the starter and it was full of grease the whole thing the copper coil and the tube the copper coil sits in n spins so I striped the whole thing down to bits cleaned it and put it back together. I still need to buy the rubber O ring and the new brushes . Then wipe...
Hi its a 96 P reg fn2 . Iv stripped the bike to bare parts the swing arm in in being powerdcoated . Then wheels are being redone in black as there gunmetal and pain to keep clean . Then the frame done in silver . Then it's all parts and new bits fitted back on . I'm going to chop the wir...
Yes it will as I'm doing a complete rebuild and my starter is one part I'm going to be rebuilding so I'll guess I need that part aswell also one very big thing rubber washer that goes between the body of the starter and the lid as mine has snapped . Hope they do that part . Or i it will leak...
Hi there yes it's was just a outside clean I planed on doing but my bro in law said might as well do what you said in said aswell . In not had chance the last cupl weeks( health issues) once I feel up to it I'll.start.again .
Cheers alln
Hi there a big THANKS for the reply .I found one vid an it's one of the ones you posted so cheers I will I will be doing the carbs in the house where its warm the mrs might get annoyed lol that's what dinning table are for . Iv been looking at buying new rubber seals so when I start if I...
Hi all as the title says I'm in need of a good guide to stripping down 750fn2 carbs it's a 96 reg don't know if that helps . As iv looked on YT and I don't recognise any the carbs (none look like mine I don't think there special just wrong years I think ) I not after stripping right down...
Hi its the rubber type black hose that goes on to the carbs then fit to the engine I don't know what there called . You got the air box then carbs then these hose things then engine .
I really don't know anything about carbs so I was asking can a bike shop clean them up and get them right...
Hi all . So its been a few months now and due to cold weather iv not done as much to the strip down as I planed but today I got the wiring harness off marked up the plugs and taken the carbs off . The wiring is not as bad as I thought it's just the back section been chopped an butchered so...
Hi thanks for info I got them out over the weekend and tho the small one was bit fiddly I got the cir clip out and them it but the long one I had the bust it apart to get it out that was rammed in well . But both are out and no damage to the swing arm .
Hi all I have a 1996 cb750fn2 P reg .
So at the moment it's being stripped down for power coating. So I taken thw swing arm off and got one of the bearings out quite easy undo circlip and use long bar to push it out. Well one side was . So iv tried to undo the 2and one the long bearing if...