M Saunders
CB750 Member
I just purchased a 70s Santee plunger frame chopper with a 74 cb 750 k motor on it. The bike was my wifes uncles project the bike has an old santee oil tank that wraps around the battery. The tank has two 5/16 flair fittings on it that he has made an adapted to fit the original oil lines. I am worried that the oil tank fittings will be to restrictive for the motor the insid diameter of the factory oil lines look to be at least 1/2 or 12 to 13 mm. I would much appreciate any info i can get on this.