So after finally getting all the wiring issues sorted out on my recently purchased box bike iv got an issue that I cant finger out.It had pod filters on, I pulled them off and bought a used airbox, after getting it all together I was having problems getting it running, before I pulled the pods and went with the factory box I got it to where it would atleast start and run. It was bogging and backfiring with the pods which I figured was due to previous owner not re-jetting.While I was waiting for the airbox I pulled the carbs for cleaning and found that the jets were 68 and 100.With carbs cleaned and bench synced I installed airbox and carbs only to have the bike not want to start. After half a day of tweeking and fighting it I pulled the air filter out just for shits and first crank it fired, but will not run with filter in? Any advice