SeattleRod
CB750 Enthusiast
So, I'm installing an aftermarket speedo with integrated idiot lights, for a cleaner look. The new idiot lights have only one turn signal indicator that would flash when either turn signal is activated.
I understand that having two wires coming from the bike harness ( orange and light blue) going into a single wire to the speedo, I need to install a diode on each wire, so I don't have both sides blinking when activating left or right.
The signals share a 10-amp fuse with front/rear brake lights and horn, so would a 3-amp diode be sufficient for the turn signals?
That's all they had at RadioShack
Thank you all in advance. Cheers.
SR.
I understand that having two wires coming from the bike harness ( orange and light blue) going into a single wire to the speedo, I need to install a diode on each wire, so I don't have both sides blinking when activating left or right.
The signals share a 10-amp fuse with front/rear brake lights and horn, so would a 3-amp diode be sufficient for the turn signals?
That's all they had at RadioShack
Thank you all in advance. Cheers.
SR.