Recent content by M Saunders

I have a stock 74 cb 750k that i am having problems getting it to fire properly on all 4 cylinders. I rebuilt the carbs and bench synced them and set proper float height. I Installed new plugs, plug boots and points I gaped then dweld the points then set timing. cylinders 3 an 4 seam to run good...

The inside diameter was 1/4 I have already changed it to a standard 3/8 od or 5/16 id . I think 5/16 id will probably be big enough ?

I think it is a 5/16 od flair i have 3/8 od fittings they are to big and i have 1/4 od flair fittings they are to small. It is definatly a mail flair fitting but i'm not positive that it is 5/16.

I have a santee frame withe a old oil tank that has 5/16 flair fitting and was wanting to know if the 5/16 would be large enough for the 74 cb 750 k motor.I would appreciate any info on this thanks.

I just purchased a 70s Santee plunger frame chopper with a 74 cb 750 k motor on it. The bike was my wifes uncles project the bike has an old santee oil tank that wraps around the battery. The tank has two 5/16 flair fittings on it that he has made an adapted to fit the original oil lines. I am...

I wanted thank you you for your help and after the riding season is over i will pull the valve cover and send you picks of the numbers on the cam. I am also reaching out to previous owners and will let you now if i find out any more info on how RC built the motor or if i can get paper work on...

It was around 16 yrs ago when i sync the carbs i did use 4 vacuum gauges made for sync carbs it was a set i borrowed from a fend i don't think it was a very good set. If i remember right i struggled with the vacuum being really erratic causing the gauges to bounce alot i will by a new set next...

This motor was built by RC in 75 I took the starter cover off today an discovered it does have a starter. I will pull the dino cover this winter when i am dun riding and see if the fly will has starter teeth. I also plan on pulling motor and valve cover i want to replace old valve seals and...

No as far as I now it wasn't a race bike the motor is mounted in a stock cb F frame. I don't have any of the RC paperwork i am going to ask family members that owned the bike in the past but i doubt i will have any luck. The only visual sins the motor might not be stock are allen bolt kit on the...

High my name is Matt i have a 75 cb 750 f with a RC installed 836 kit that has bin in my family since it was new. My dads uncle was the original owner all the organelle paperwork on the bike was lost over the years. I would appreciate any info i could get on the rc 836 kits and could anybody...