Recent content by PRIMEWORKS

I've had some bad luck with one of my fork seals consistently leaking and wanted to get the opinion of others. Take a look at the following pictures and please let me know if anything obvious stands out that could potentially cause a fork to leak: I feel like the problem likely has to do with...

Scratch that. The bolt threads are completely messed up which is the result of the nut being messed up. Anyone know of a part number for this bolt?

Please close. Nut ended up not having any threads left in it. cut off the nut carefully and replaced it and problem solved!

So I have a bolt on the exhaust side of my engine just in the front that appears to add some clapping pressure to the gasket between the cylinder and the bottom casing of the engine. My only problem is that I can't get this bolt to tighten therefore I've got a rather decent oil leaking going on...

Please close! Happily found a set!

Both sides!

bump !! Anyone?

bump! Anyone?

Those are all the same pictures :/

pm'd please let me know if anyone else might have these! thanks!

Awesome! please let me know!

Been looking for an Engine guard/Crash bar/Highway bar for a long time and just can't seem to find one. Please let me know if anyone has one and is willing to sell it! Picture for sample! http://springvinmoto.com/albums/album252/1979_Honda_SS_right_side.jpg

so I'm in the process of test riding my 1981 cb750k every other day because I've just recently completed a rebuild on it and have run into a bit of a running issue and I wanted to run it by some of you. So to break down my current set up, I have 4-1 aftermarket MAC exhaust with a baffle in it...

next problem. In an attempt to install the exhaust cam, the manual says to take off the exhaust camshaft sprocket and place the sprocket under the exhaust chain and feed the camshaft through but I can't seem to feed the exhaust cam through because there doesn't seem to be enough slack in the...

never mind i figured it out. chain was in the way preventing the motor from spinning completely.