Hastings

Excellent thanks BrettP, got them ordered!

Well I pulled to old shims from the valves with the .008" and .009" clearance and the old shims measure 3.175mm with the calipers Based...

Thanks for the responses. I'll make the changes and let you know if she rev's up!

Sorry sent before finishing. Based on this should I change all but the .006" or do those also?

Ok my valve shim tool is on it's way. I cracked open the valve cover and took some readings today (see below) exhaust Cylinder...

Thanks BrettP! So based on what I'm seeing I should set them at .005 you agree? I'll order the tool and crack it open.

Ok I removed the carbs, didnt separate them but: Cleaned each carb top and bottom. Removed all the jets except the secondary (could only...

Thanks BrettP!

I do have spark on #2 looks about the same as the other three cylinders. How big a job is adjusting the valves?

Bought a non running 1979f SS that would not start. After several carb drains and fuel/carb cleaner it starts right up with the choke...