Unknown screws from spark advancer or starter clutch flew out

[samcraig182]

Was taking the very very torqued spark advancer out and while taking it out two tiny screws popped out from somewhere. I have been looking through diagrams and pictures but cannot find where they belong.

I think they may be from the spark advancer or the edges of the starter clutch where the rollers and springs are housed. Either way they don't fit anywhere because they probably stripped the hole so it is very hard to tell.

1981 Cb750 unit.

 

[amc49]

Where are the two screws that hold the pulser plate to the outer cover? If they are a couple of the 3 that hold the starter clutch together then wrong type, they come loose easy anyway and if they are the proper flange bolt type. Those look too small for that though, more like the pulser plate holddown screws.

Retighten the clutch screws anyway, they are commonly loose and need loctite too.