nsxguy7
CB750 Member
Hello all. I'm at wits end and hope someone can help me.
75 SOHC motor. Just did a stock rebuild. Head professionally rebuilt. Everything lines up as per the manual. #1 cylinder at TDC, notch on the cam pointing up, etc. I adjusted the valves on cylinder #1 no problem. According to the shop manual, you adjust the exhaust valve on #2 and the intake on #3 at the same time. No dice. On both cylinders, even with the adjustment screw backed all the way in, the rocker is sitting tight against the top of the valve stem. I've triple checked everything and I'm stumped. Please help.
75 SOHC motor. Just did a stock rebuild. Head professionally rebuilt. Everything lines up as per the manual. #1 cylinder at TDC, notch on the cam pointing up, etc. I adjusted the valves on cylinder #1 no problem. According to the shop manual, you adjust the exhaust valve on #2 and the intake on #3 at the same time. No dice. On both cylinders, even with the adjustment screw backed all the way in, the rocker is sitting tight against the top of the valve stem. I've triple checked everything and I'm stumped. Please help.