tilersheer
CB750 New member
I'm working on a 76 750f with stock wiring. The dash was removed and the eight or so wires going into the dash (for the bulbs) were cut. Bike now starts and runs as it should, but no working lights (head, tail, brake...bike has no turn signals or high beam switch).
I need the simplest way to wire the lights. I had the thought of splicing into the wire that comes out of the ignition switch (i think its the red/blk wire on my bike...if you know this to be false please correct me!) and running straight to headlight, brake switch, tail light so that if the key is on it should send power to the lights.
http://www.cb750.com/threads/9-Honda-CB750-Wiring-Diagrams
The second diagram in the thread above shows a simplified wiring diagram that seems to agree with my idea...has anyone "hardwired" or done something similar? Thanks in advance!
I need the simplest way to wire the lights. I had the thought of splicing into the wire that comes out of the ignition switch (i think its the red/blk wire on my bike...if you know this to be false please correct me!) and running straight to headlight, brake switch, tail light so that if the key is on it should send power to the lights.
http://www.cb750.com/threads/9-Honda-CB750-Wiring-Diagrams
The second diagram in the thread above shows a simplified wiring diagram that seems to agree with my idea...has anyone "hardwired" or done something similar? Thanks in advance!