frame

Way back on 8-16-2014 raene asked the question whether his 82 cb750c forks had to go to the dealer for disassembly. The question was never answered so I'll ask it again. Clymer book says my 82 F forks have to go to the dealer for disassembly -- true? Or is there some other way? I drained the...

Building an engine test stand. Will a 1978 CB750K SOHC engine fit into a 1978 750 automatic frame? All I need is the cradle.

I'm owner. Would it be interesting to sell the k0 chassis and mount a k5? What is the value of a k0 chassis?

I am trying to get the master cylinder reservoir off the base. It is the plastic one with the 4 screws to hold it in place. I removed the 4 screws and tried to pull it out. It will rotate quite freely but it refuses to come out. It looks like there is two rubber "O" rings or seals that is...

Hi there; does anyone know where I can get a front brake hose for a 1980 CB750 Custom, by chance? Thanks Chris

I am new to vintage CB's and I have a question regarding tire compatibility. I have a 1979 Honda CB750k The manual lists the tire sizes as the following: Front Tire--3.50H19 Rear Tire--4.25H18 I would like to mount a pair of Shinko 270 tires. The closest sizes that the Shinko 270 tire...

Wanted to get a spare caliper for my '79 750LTD. Looks like left caliper from '81 Custom is the same. Can anyone confirm? Thanks.

Trying to work through all .the issues on my newly acquired 1980 cb750c. I noticed that when the front wheel is straight the handlebars are cocked slightly to the left. Is there a way to adjust this or it it more serious like bent forks? Thanks for listening. Paul

On my 1982 CB750SC Nighthawk, the left front fork has an adjustment screw at the bottom, and no apparent fork oil drain screw (just one on the right fork). None of the manuals I can find show this config. Any idea what this adjuster is and how do you drain the left fork? Thanks.

Just purchased a 1977 CB750k. It's in pretty good condition other than the fact it has been sitting man years. I've got it running pretty well but the front brake was not functional. Rather than chase the problem down part by part i replaced everything from the master to the hoses to the...

So if taken apart my calipers, greased the sliders, felt that the piston was moving freely and reassembled everything. New master cylinder and fluid. I bleed the brakes and I have good pressure at the lever with no fading. When the bike is rolling and I pull the lever to stop there is hardly...

Title says it all. Got a new tire and it rubs on the fender. Does anyone make an extension or something for the fender? Mine doesn’t appear to have slots to adjust it. Previous owner did a fork swap with some other Honda bike for the dual disc brakes.

I've been creeping for a while now and cant figure out what's causing my front end to hop between 30 and 55 mph. I just bought the bike 2 weeks ago. I noticed the hop on my second ride. About 35 mph it becomes noticeable. Its a very rhythmic bounce too, not constant through the whole ride but...

I'm trying (and failing) to find a billet top clamp for my 1981 cb750k. I ordered one from Cognitomoto that was supposed to fit my bike (the listing was "CB750F 75-78 & CB750K 77-78, CB750K 81-82"), but the holes for the fork tubes weren't even close to lining up. After a few emails back and...

Who has input regarding the quality of aftermarket chrome rims? The rear wheel on my 77 CB750K has a handful of broken spokes and the rest are rusted beyond refurbishment. The rim is ok but scratched and rusted in spots. Thinking of buying a new rim when replacing spokes. Any input is appreciated.

My 750 k1 doesn't have the rubber boots on the front forks. I want to replace them for the original look but have yet to figure out how the small ring (fork rib) secures at the top of the boot. What keeps it in place? The current rings on my bike were just held in place with electrical tape...

I have looked around the forums and no one seems to have the same problem as me. I got the fork seals changed and put the forks in the top triple trees evenly. But it seems to me the axle is not on evenly. Example when I press the front brake there is no pressure and I can see the front wheel...

I need a rear tire. The current mounted tire is 4.50-17. Tire dealers I have searched state that the rear is 18". Even Partzilla shows it as an 18" tire. This bike is all stock with the Comstar wheels. Cannot find a 4.50-17 vintage style tire anywhere. What would be the proper metric size....as...

Hi all, I have a couple bearing questions. I just installed my new steering stem bearings and I cant seem to get them seated all the way. I have the motion pro steering stem bearing driver and I'm whacking it as hard as possible but it won't go that final mm. What should I do? Should I freeze it...

Hi All, I recently purchased a 1982 CB750, I have the registration plate but the frame has been painted and sanded so many times I can't find the vin number on the headstock. What are the options for this? Can I get a V5 and MOT without the frame vin? Cheers, Steve

Dont know if this is the right group to post on sorry if it isn't. Does anyone have the specifications on a 1978 cb750k handlebars looking at aftermarket ones that might have a similar rise,width and pullback. Thanks.

Hi all, I’ve just rebuilt the carbs on the bike I’m putting together and just wanted to know where the tube that comes off the plastic T piece between #2 and #3 is supposed to go please.

Hi, all. I'm coming to you as an ignorant noob, hat in hand, with my first motorcycle and a ton of capacity for learning (aka, I don't know anything). I bought my 750 from an old coworker who told me it was a 1989. I'm not mad about that (it's very cheap and it runs) but it did lead to a few...

Hi everybody There is any way to know the wheel offset side to side of the rim in relation to the hub. I am assembling the wheels without previous references because they where in parts. Best Regards

hi all, is there a strong argument for either rebuilding or replacing the OEM brake master cylinder on my cb750 DOHC? Thanks.

Would air assisted, 81 CB 900 C front forks be a direct drop in replacement for my 82 Nighthawk SC triple tree? I am pretty sure these are both 37mm forks. The axle mounts behind the tube, forgot what it's called. My inner tubes need replacing and I'm shopping on ebay.

Looking for the O.D. of the factory bushing in the swingarm, anyone able to help?? Les Holt

At some point after the riding season begins, I will have to replace my rear tire. Will save money and downtime by removing the wheel myself. Bike has the original 4 into 4 exhausts. Looks like left set of pipes will have to come off. If the axle is frozen, might have to remove the right set too...

Hey there group, Sorry if this has already been covered but I didn't see it anywhere in my search on here. I'm currently doing a 77 CB750 caferacer build. I've seen where you can direct swap the 630 sprockets and chain to a 530 sprocket and chain without using an offset sprocket, and I'm...

Need some assistance. 79 750F Super Sport. Has sat in dry storage since 1988. I'm rebuilding the wheel and master cylinders. The piston is STUCK in the rear master cylinder. I've taken everything apart but that. I was able to tap it to move it in the bore, hit the intake with air from my...