Have not been on here for a while but don’t want to leave anyone out. Me and my partner Phil have been making and selling our version of the old Santee Box. Plus we are also making coil boxes.
So our version is different than the original and we hope you will like it. We gave it more air to cut...
Just a heads up I am almost caught up and just want to thank all the great info me and Phil got from you guys and especially Rick Shields . We are getting close to sell the coil box that Phil and Rick thought would be helpful. Newer coils present a problem with fitting in the older boxes so this...
I build Harness Kits and also will work with you to do a custom harness for your bike.
Just finished up a members 1976 750 and worked with him to do a great job on his end
2020 PRICES
Simple kit use for choppers-bobbers-café bikes JUST THE WIRES $50.00
Front and rear lights-horn-front and rear...
Kit I found in box that I didn't know I had
It has lights front and back - brake switch front and back - electric start - kill
Switches are Push button start - Toggle for Kill - Toggle for High/Low beam
tested with 12 volts and just need fuse block
MY loss your gain $75.00
I only have the basic kits in stock
which are lights front and back - coil & ignition and rear brake switch $45.00 shipped FREE IN USA
ANYTHING ELSE I would have to make up and ship out
I can make a cut down full harness FOR CHOPPERS that has lights front and back - horn - Brake switches front...
Building season has got you to go out into the garage LOL
I make CUSTOM WIRE HARNESS for just about any bike
SIMPLE CHOPPER HARNESS start at $45.00
ADD turn signals/horn/and what ever you want to that simple harness.
CUSTOM HARNESS START at $45.00 shipped FREE IN USA
Contact me at...
I make up HARNESS KITS for most bikes and have a couple kits left .
My harness kits handle
3 wire head light
3 wire tail light
2 wires for front and back brake switches
2 wires for horn
1 wire for coil and ignition
6 position fuse block
You can add wires for turn signals and electric start (...
If anyone needs help with there build I still make HARNESS KITS for CHOPPERS/STOCK/CAFE/BRAT/or???
Harness kits Get you started on the right track to make the wiring of your bike easy. I have sold over 180 kits to date for XS650/CB550-750-900/Suz 750-450/kaw 750-900-1000/Triumph/BSA/Harley
My...
I have two HARNESS KITS left and offering them as a DECEMBER XMAS SALE
Harness Kit gets you started on your wiring setup ALL NEW 16 gauge wire color coded for easy understanding
IT covers.......... FRONT AND REAR LIGHTS - HORN - REAR BRAKE SWITCH - WIRE FOR COIL & IGN
Wires go in correct...
I posted before and thanks for all who bought
I have 2 HARNESS KITS LEFT for MAY 2016 ready to ship
These kits do LIGHTS FRONT AND BACK HORN BRAKE SWITCH and wire for COIL AND IGNITION
THIS is a universal kit that can be used on many bikes. I have sold over 50 for XS650 bikes.
Great starter kit...
I offer WIRE HARNESS KITS on the other site and was asked some questions about them for CB750 and other bikes.
MY KIT offers you the wires setup for FRONT AND REAR LIGHTS-HORN-BRAKE SWITCH-COIL & IGNITION
YOU GET
3 wires for HEADLIGHT HIGH / LOW BEAM and GROUND
3 wires for TAIL LIGHT...
I only have a couple left and have sold these on other sites for TRIUMPH XS650 CB750 and some others
This is a STARTER HARNESS Kit for guys who what to make up there own setup. It comes this way
3 wires for head light HIGH / LOW beam and GROUND
3 wires for tail light BRAKE / RUNNING LIGHT and...
HI guys
I am on the other site and offer HARNESS KITS and CUSTOM HARNESSES
HARNESS KITS are just the wires for you to finish up the way you want
THEY HAVE
3 WIRES FOR HEAD LIGHT HIGH/LOW/GROUND
3 WIRES FOR TAIL LIGHT RUNNING/BRAKE/GROUND
2 WIRES FOR BRAKE SWITCH HOT/WIRE TO TAIL LIGHT
2 WIRE...
First if it will not rotate all the way around and only goes so far in one direction and the same in other direction STOP!!!
You could have a couple things wrong
1. You have bent valves and they are not closing and the pistons are hitting the valves
2. Cam chain broke and it will allow you to...
Stock harness you will have 12 volts to ignition switch on red wire . That's the feed from battery
You should NOT have any voltage to other parts with KEY in OFF. If stock harness the kill switch is direct contact from KEY SWITCH ON to KILL SWITCH on handlebar to Coils and Ignition trigger or...
If you want a basic wire harness like that diagram I do make them up . I do them for XS650 CB750-650-550 KZ550-650-750-900 and other bikes. I do have basic kits that you finish up that have wires for lights-horn-electric start- brake switch- ignition and charging all new 16 gage wires
Basic kits...
If i am reading you right you had a broken ring and cylinder was not damaged?? There were some nice kits on ebay and not too high priced. I would take your pistons to a good shop and have them checked to make sure there was no damage done to them. I use to be a HONDA Dealer in the 70's and 80's...
I am new to this tread but not to others and i have a buddy doing polishing and powder coating on parts for other bikes and he is making up wireing harness for chops and i just want to ask if any of you guys would be interested in any. I have sold for him many CB1100f polished parts and alot of...
Well look at it this way . 5 years ago i started to clean out my Honda dealership because my partner was dieing and i wanted the property to go to his kids. Parts and bikes were mine and the shop was closed since 1981. So i had rows of shelves of parts in original bags and motors /bikes/and...
One of these sold in FL last year for close to $100,000 and a 1973 KZ900 for almost $40,000 . I think it was Barrett Jackson . There was a private collection with 40 bikes . Yes you are right that was a older pipe the original pipe has plates on the side can't miss it. I wrote on another tread...