I finally found a correct wiring diagram for my bike. it shows the brown wire going into the bucket is not connected to anything so i am leaning towards a bad ignition switch. now its doing something different.when the bike is running the tail light is on but pressing a brake makes no...
i chased the brown wire to the ignition switch and its fine up until there. as you mentioned i checked the headlight bucket and found the same brown wire that split off from the same wire before the ignition switch but its not plugged into anything. i looked at my diagram and it shows no split...
Thank you. the brown wire i referred to is under the seat i checked for power and it has none. i will check connections behind the headlight tomorrow and will also check the ignition switch, which it might be that. when i turn the key to "p". the tail light comes on. that is the only light that...
I have a 1978 cb750k
i am trying to work out a tail light issue the brake light works fine but no running light i have a wiring diagram. my question is if the brown wire is for the tail light/running light. and according to the diagram it goes to the combination switch. where is this switch...
I have a 1978 honda cb750k. I have been doing a cafe style build but i have ran into a problem with the tail light. with the key on lights work correctly except for the no running light. i press the brake handle and the brake light comes on like it should but that its. when i turn the key to...
I counted the rollers and got 88 i then counted the outer and inner plates and got 88 so i`m assuming my drive chain is 88 links long. When i look for a new chain for the 750 these parts sites keep showing up with 110 link chains for the 78 cb750. so the question arose do i not know how to count...
Does Anyone have an idea? Maybe i can rebuild this one if I get one that works and just replace parts that need to be. Can That be done you think? Has anyone done it?