Recent content by shaunbe

Better late than never I guess.

Mine is a jdm model with the blinks speed indicator, not sure if the engine thats in the bike now is anything different from a US model or not but its stuck solid.

I have an extra engine that my dad has had stored for probably 15 years, it supposedly has an 836 kit in it, I'll find out soon enough.

Hello everyone, I'm curious if anyone has done this swap or not onto a sohc cb750? I have a somewhat complete 83 gs750 and am wanting to swap parts to my 70 cb750. Thanks for all advice

Not trying to hijack but oldstuff I live in seguin Texas and am about to start working on a 1970 or 71 cb 750 that was my dad's in 1983 and was given to me when I was 15 and borrowed parts off of it for a 76 I had, the 70 or 71 (unsure exactly because of frame numbers) is actually a jdm model...

I'm looking for a good straight henry abe 7star front wheel for a k model, anyone have one they want to get rid of?

How much do you want for It? Feel free to call or text me 830 703 6909

I don't have a good useable stock air box, the foam filters were given to me when I got the bike. I know id have to rejet, I just figured with a more direct path of air flow the carbs would work better, maybe on a newer cv carbs it would help being that they have more air passages.

I am going to do that, I'm just dreading pulling the carbs apart and syncing them all up again, but I gotta do what I gotta do to get it running properly, I've been fixing oil leaks and such lately, so that is the last part of the puzzle is proper running engine, I've been thinking of putting...

Yes carbs were synched when I did a complete tune up. And the bike will run all the way past redline if I let it. I can be running at 4k rpm in 3rd and just twist it wide open and it falls flat on its face, almost as if someone cut off the ignition, then if I do the same thing with a little...

Hi all, I'm having fuel issues and I'm stumped on what it could be, I've ran all different main jet sizes to play around with fuel after 1/2 throttle. Was running 117.5 mains in it and when I would get on it hard it would spit and sputter and my dad riding next to me says it would smoke alot, so...

Nobody has any idea?

Hi all, I finally took my 76 out on the highway, but I hate that it runs at 5500 rpm at an I dictated 77ish mph, as far as I know it has stock front sprocket, the rear is a 48 so that should be stock size, I'm running a 130/90-16 tire on a henry abe wheel, what would be a good swap, put the...

I have about 7 windjammer fairings sitting around that I've gotten for free because nobody wants them.

Might sound crazy but the bushings might seem tight when the suspension is fully extended, considering the suspension is compressed while riding and has worn most in a certain spot, Not sure if it makes sense but it is possible