Recent content by Greendemon

As a mistake putting things back together once I plugged in the ignition harness into a different one, it was doing something similar to me, just as a double check make sure all the harness plugs are in the correct spots

That's some awesome info, I will be getting my new petcock soon, I'll fill you in on the results , with what you tell me I'm hopeful this one one will work out fine since I'm building this bike for looks and not racing , thanks again for the replies

That makes sense, so what did you do on your 550 to correct the problem, and did you bore it out or was it a true 550

Thanks for the info , I had one of those cheap Chinese petcocks laying around and tried it and the bike seemd to be starving for fuel so that's why I ordered the Honda one but if I'm going to have the same issue with fuel delivery what are my options at this point, the Barb difference is HUGE...

I have an 82 dohc cb750c (custom) I swapped the tank with a 79 cb750f (super sport) , I ordered a petcock from Honda part # 16950 _MA4_771 not cheap either , I go to put it on and not only is the nut the wrong size not even the filter will fit the output on the tank, I do some research and there...

I'm not sure if they are side specific

The condition of the cover is not important, the foam needs to be decent condition, and the condition of the pan is the most important, little to no rust, let me know what you have

You make good points, thanks

82 cb750c I've read/heard different sources about the function of the front fender, the obvious being to keep dirt, water, debris out of your face , I've heard that it acts as a kind of "brace" for the front end. I recently did a bit of work on the front end , I removed the front fender and I...

Are your side covers still available, I'm swapping the tank on my 750c to the 750f and I like the look of the 750k side covers, I know they don't line up but I think I can weld the plugs where they need to be