hi
trust me this will be a dumb question but I have to ask.
I want to install clip on's on the 1977 forks (35mm i hope is correct)
My dumb question is this.
I take the handlebar off
I undo the four pinch bolts ONLY on the top triple tree and then pull this up until they are off the forks.
I...
It's a 1977 F2.
I bought it off a wrecker (not sure what the USA call them) about two years ago and it looked like it sat before that for a long time. It started but ran rough. Then it sat in my place for another year (me being lazy and other projects).
Yep, will change all brake lines front...
Latest update
Have removed both calipers
Had to use PB blaster and a new Allen key with a extended bar to apply force
Will post pictures soon of the cleaned calipers
Oh also ordered new brake pads
Latest update
I pulled the old one apart and it was too far gone. I bought another MC
I put it all together and tried to reverse bleed the calliper. I couldn't even get any in the bleed valve.
I suspect the calliper needs a rebuild or worse a new one.
I tried to pull the calliper off the...
Hi
Onto the next part of the rebuild. I am looking at brakes
The front brake lever and assuming at this point the lines are full of air and no fluid.
I removed the front brake unit as the lever does not return or spring back
Rather than buying another unit I would like to see if I can fix...
Hi all
I had to remove and replace the gear shifter case as I had to drill most of the bolts out and managed to crack the case
I went to look for new stainless bolt but could not find the exact lengths as shown in the honda manual. For example I could only find a 35 mm instead of a 40mm and a...