Recent content by Dyl81cb750

Thank you so much I was having a hard time finding proper bolts. I will go ahead and order the bolts and gasket and pray that it solves my oil leaking issue. Do you think new bolts and gasket will solve my issue? If not I guess I’ll sand the cover and where the cover mounts in that place where...

Can anyone help me find new starter clutch housing replacement bolts for an 1981 cb750k? It’s 8 bolts total 2 long and 6 short. And possibly a website to get a good rubber gasket I’m having oil leaking issues from the bottom of the housing. Thank you

So I did the starter clutch upgrade to the Yamaha R6 starter clutch to solve the horrible rattling sound from the bad rollers and springs but I have it installed and im having questions. I had to take off the ignition advance rotor for the upgrade does that it affect the timing when I take that...

Only happens sometimes but when trying to start it makes a horrible rattling sound coming from the starter clutch gear and the reduction gear being loose I think. All the teeth on the gears look in tact and I didn’t see any chips on them. I checked the bolts holding the drive flange but they are...

Count me in! 👍

My 81 cb750 does the same thing on initial throttle, it sputters between 1.5k and 2k rpm’s but when I give it throttle it’s fine. Please let me know if you find out the solution.

Seems to sputter on initial throttle between 1.5k and 2k rpm’s anyone know the solution?