Results 1 to 2 of 2
  1. #1
    CB750 Member Jarrett_Honda's Avatar
    Join Date
    Nov 2016
    Spokane, Wa

    Shoei saddlebags installation

    Does anyone have experience installing these bags on a CB750? I was able to attach it to the two bolts that go through the rear turn signals and grab rail just fine. It's the bottom support bracket that's the issue. The plan was to attach the bracket using the bolt that hold the exhaust and passenger foot pegs on. However that bolt is too big.

    I suppose I could mount the bracket to the bottom bolt for the shocks but I'm thinking that would be bad if it limits the up and down movement of the swing arm.

    Sent from my SM-N950U using Tapatalk

  2. #2
    CB750 Guru amc49's Avatar
    Join Date
    Sep 2015
    Fort Worth TX.
    That last lower link likely goes much more up/down than sideways, it will support better that way. The way you are trying to do it loses leverage and the link is not long enough anyway.

    Do NOT put it on the bottom of shock, dangerous to do so!

Similar Threads

  1. Saddlebags
    By Jarrett_Honda in forum The CB750 Garage
    Replies: 2
    Last Post: 06-01-2017, 04:40 PM
  2. Carb installation HELP
    By CivilPenny in forum The CB750 Garage
    Replies: 11
    Last Post: 10-05-2016, 08:55 PM
  3. Wanted - Hard saddlebags for 1980 750k
    By RonaldModelle in forum Classifieds
    Replies: 3
    Last Post: 10-13-2014, 11:53 AM
  4. Ammo Can Saddlebags
    By hje_326 in forum The CB750 Garage
    Replies: 0
    Last Post: 06-14-2014, 07:18 AM
  5. Saddlebags for '77 k
    By hje_326 in forum The CB750 Garage
    Replies: 1
    Last Post: 08-27-2013, 02:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts