SurferD
CB750 Addict
I just changed my fork seals, dust caps, and the little split plastic seal inside the cartridge. It went pretty well except for the darn clips.
I filled each leg with 6oz 10w and put the springs in small diameter first. I can’t get the fork caps to engage without slightly cross threading. I’m using my thumb and the end of a small hammer to compress and a 17mm wrench to turn. I don’t remember this much pressure when I took them apart. Could the springs not be seated correctly inside?
I filled each leg with 6oz 10w and put the springs in small diameter first. I can’t get the fork caps to engage without slightly cross threading. I’m using my thumb and the end of a small hammer to compress and a 17mm wrench to turn. I don’t remember this much pressure when I took them apart. Could the springs not be seated correctly inside?