Wills 750ss
CB750 Member
Hi again all,
I was able to get my carbs. all reassembled and installed. Checked my point gaps and cleaned and checked gaps on plugs. Emptied and cleaned out gas tank and put in new gas. I haven't installed to airbox yet just tried to get it running. Charged up battery and it roared to life, used Choke to get started. After a running awhile to warm up, started backing off choke and it dies. It will not run unless choke is on full. Now I'm not a newbe at mechanical things but ?????? I set the mixture screws to 1 3/4 turns as suggested in the manual, so I'm thinking it should at least kind of run.
Suggestions appreciated, thanks in advance.
Bill
I was able to get my carbs. all reassembled and installed. Checked my point gaps and cleaned and checked gaps on plugs. Emptied and cleaned out gas tank and put in new gas. I haven't installed to airbox yet just tried to get it running. Charged up battery and it roared to life, used Choke to get started. After a running awhile to warm up, started backing off choke and it dies. It will not run unless choke is on full. Now I'm not a newbe at mechanical things but ?????? I set the mixture screws to 1 3/4 turns as suggested in the manual, so I'm thinking it should at least kind of run.
Suggestions appreciated, thanks in advance.
Bill