Clutch was doing fine until I changed the oil I used valvoline motorcycle oil when I replaced it and now when riding if i get down on her the clutch will slip around 5k
So I replaced my flywheel and it loosened up and made a knocking noise in the engine. The knock is now gone but how can I hold the flywheel so I can tighten the bolt up? Tried the rear back and putting it in gear and the bolt still spins very easily
I replaced my stock seat with a much smaller one and welded on a new seat hoop. Now the rear tire rubs and I have the stock shocks maxed out with stiffness anybody know of any shocks thay will fix this I'm thinking I need a 15 or 16 inch shock!
So my 80 cb750 I just replaced the stator bc I figured that was the problem but now the bike will run great but I was riding it and it just died and would not even think of cranking over.
So with pods if you take electrical tape and wrap 75% of each filter the bike runs beautifully! Now my stator is bad so that's gotta get replaced as well
I want to get rid of the stock ignition and kill switch. I want a key hidden one the underside or side of the bike has anybody don't this to a 80 cb750?
Starts and idles beautifully. I just removed the air box and installed pod filters and also removed the lines from the oil tank and the opposite sit and put breather filters ok them. Between 4 and 6k the bike boggs down I am in the process of running sea foam through the whole system to clean...