The 17" is from a 8K.
I'm looking at these pictures and I'm hoping that I moved the axle when I took them. They seem to be sticking WAY out on each side. I'm going to measure.
While disassembling my suspension, I discovered the previous PO has broken off a bolt in the threaded 7/16" cavity...
I'm not sure what I did, other than switch the wheels again, but this time the 18" seems to be centered. Same 1/2" space on the right. Still snug against the sprocket. Gremlins.
I've posted pictures of both wheels on the frame. Each one came from a running CB. (the one with the tire is actually a stock 17".) It doesn't look as though there is any damage at all to the frame. No dents, no bends. And if it was, (to get the wheel so off center) wouldn't one side be quite...
Ha! I figured out how to get the end caps off when I discovered they were called crown nuts.
As for the wheel. It's an 18" cb750k4/5. The stock spacer won't fit. There's less than 1/2" space left. And the sprocket side is flush with the spring so there's nowhere to go anyway. I'm stumped.
Great thread AND build. I'm starting my own amen/cb too, and have come upon an issue. The rear tire is almost 1 1/2 inches off center. There are no spacers on the axle and no room to go either way. Any thoughts?