Search results

Thanks S and DD, and the hondachoppers (I love pictures)... Your right S taking my carbs apart and giving them a good cleaning was the smartes thing to do, when your knew and know nothing about carbs, it can seem a little daunting/big job but know I can say that wasn't bad at all, only if you...

Nope. boots and exhaust headers are sealed. I turned the choke on, as the sleeves were bottoming out the bike calmed down and idled to manufacturers settings (900-1k ROM's) sweet!! Im in business. Know I just need to figure out the jetting, I'm thinking pilot jet #42 but I'm also thinking...

I pulled the spark plugs out, well only 1and4 for obvious reasons, both are white/light gray and one plug had a half white ring on the outer edge of the ceramic. I'm guessing I need to go up on my jets but how much and would that solve my idle problem? I also tried tightened the air screw half...

Ok I went back at it and I have the little idle screw on the filter side a 4 full turns out and it looks like it did something, it brought the back the idle to 4k RPMS. I thinks its almost all the way out. I also should mention that I'm doing this without the pod filter in. ????

Alright stabler, I got the bike running (sweet!) I just don't know what to think. I thought I was running lean but know I'm starting to question it. So maybe you can help out. At the first start the bike ran around 2k RPM with popping/backfire and noticeable spitting on cylinder 1, after a...

Even though the carbs aren't that bad it would have been nice to have them ultrasonically cleaned if only I couldn't fine someone to do it, instead I had them dipped in a carb clean solution. I'm hoping it will clear out the gunk inside the carbs passageways or make it easy when I use a wire...

Got done taking one carb apart the main jets (105), slow jet (40) they are stock. The carbs are not realy dirty just gunky but after inspecting the jets some of the gunk deposited in the slow jet pin hole, not pins, so I'm just thinking its just a matter of cleaning the jets/carb and leveling...

Finally the weather is warm enough to get back out in the garage and the holidays are out of the way, I was really starting get anxious thinking what was going on and your right the electrical was fine. Ok, I just got done checking the electrical and spending countless hours and days metering...

Yeah, it's a tease. She sound great with the choke on and yes the mid and top range sound great but once in a while I get a pop around 2k-3krpms. Anyways I have been going over it in my head and I'm starting to think my regulator might be going wrong and the electric juice from the battery is...

Hello everyone, it has been fun restoring/mod my 750k7 but I have been stuck at the tuning stage. I been tweaking my points and valves, and with some time I finally got it in specs and shes running better know but it bogs down at the beginning of acceleration and if I use the choke she sound...