mrtwowheel's latest activity

Does your choke cable work well. Does your choke fully open?

Somehow I think you have misunderstood me. There has to be slack in the throttle cables. There must be slack in the throttle cables...

Throttle cables need some slack in them or the idle will be wonky. Vacuum leaks will cause idle problems. check your vacuum port on carb...

What bike do you have, year and model? Count your teeth on the front and back sprockets. Something strange could have been done with...

Not sure about aftermarket shocks. OEM is a 10mm x 32mm bolt.

UP :)

Something I should have mentioned, the caps come off and go on easier when the top triple tree clamps are loosened.

Yeah, drain the oil before taking the caps off, push the bike down hard a few times, put the drain bolts back in. Prop the bike up...

So, If I remember right, spring then washer then spacer.

Every spring change that I've done had the spacer on top. Some spring manufacturers recommend that you cut your own spacers from PVC...

Like Loose Chain said, new isn't always good. Those aftermarket solenoids can be junk right out of the box. Have you checked the fuse at...

No horn makes me think that the battery is weak. Have you tried it with a different battery or have you checked the voltage at the...

First thing that comes to mind is your starter switch. Is it the stock type or aftermarket? I ask because the OEM switch has multiple...

Congrats in advance. After removing and bypassing that vacuum operated petcock from hell, you have just done the best mod for these...

Yeah, just like that. :) Be sure to use a filter or you'll be yanking those carbs off again. You may have to try different ways to route...

And the hose and middle barb of the T point UP.

Yeah, that plastic T goes in there and the hose goes up over the airbox, there is a U shape on the right side of the bracket that holds...

Those rubber tubes are about 3/4" long

If those two short hoses are gone...........those are 6mm fuel line, nominal 1/4" fuel line, but 6mm is a tighter fit. So..........use...

I put on my glasses........that seems to be your vent hose with a broken T connector. It goes between carb #2 and carb #3. If you take...