Recent content by Garrett411

Okay so with bike idling and the stator unhooked we tried the each of the yellow wires and the black for the ground and on each the voltage measured less that a volt AC (.3-.8). Even when the bike was running about 1/4 throttle the voltage really didn't go up. So this is all pointing to a...

Ok just am tinkering on it with a little bit of down time today and retested the rotor with my multimeter. Red on inside ring: .9-4.1 ohms then would periodically jump to a much higher number.Ex: 36 ohms. Black on inside wring: .5 - 4 ohms. Some case as the first with it hovering there for...

The new starter solenoid would burn out a 30 Amp normal fuse. The original solenoid that was faulty had a flat lead type which said it was a 30 Amp and that wasn't burnt when i replaced it and looked it over. We looked around for a while and had heard of people using up to 50 amp fuses on these...

No manual. I kind of have gone through the basics, will do all over tomorrow just to double check as specified by manual.

Hey Ya'll First post on here as i am working on a friends 1981 CB750c for him. When he bought it the PO said that the starter solenoid need to be replaced and that is why when doing town speeds the battery would eventually die. to the start the bike a set of pliers was needed to arc the 2...