Thanks for the concern!
I got it working by replacing the coils and hook up the electrics as my wiring diagram show.
The only thing I had to change was the set screw for the regulator. It charged about 15V when revving so I took it down a bit.
Rode it a good distance over a weekend and it...
Hi!
My ignition coil made a poff noice and started to smoke and melt about 30sec after startup.
Background info:
I have run my bike without the regulator.
I know, stupid af. I had a rush get it to the vehicle inspection so I left it out.
The bike ran great so I forgot about it. Also stupid, I...
My whole front sprocket for the drive is loose.
And as far as I can see I can't adjust it in any way.
I just put on the retainer ring and bolt it tightly but it's like the whole retainer is a bit skinny.
How can I adjust this?
Maybe I need a new retainer ring?
I mean, if I put spacers between...
Hi,
I'm going to mount my oil pump back in the sump but I can't find the size of the bolts anywhere.
I assume its M6 but how long should they be?
(And no I don't have the old bolts. I bought the engine and I got the pump on the side).
Thanks guys!
Dan
Hi,
I have a cb750 -71.
And I noticed the battery wont charge.
I measured the rectifier and got 0.2V DC. So I continued with measuring the volt from the 3 yellow wires from the generator and got 0.2V AC so i think the rectifier is OK but something is wrong with the generator.
After some...
Thank you so much for the guess!
The wierd thing I think is that the black and white is a smaller gauge wire than the other's.
But I'll try it your way and will hook it up in stages to be able to measure the voltage and such.
Thanks again man! Much much appriciated!