• Enter the March CB750 Supply gift certificate giveaway! It's easy... Click here, post something, and you're entered into the drawing!

What's going on here?

nsxguy7

CB750 Member
Messages
16
Reaction score
0
Points
1
Location
Fort Collins, CO
I really need some help here. As you can see in the photo, my carburetor cable and linkage is obviously very misaligned. It's probably off by a good quarter inch or so. I see no way to correct it and I see no room for adjustment from side to side. Anyone have any ideas and thanks in advance.
 

Attachments

  • IMG_0038.jpg
    IMG_0038.jpg
    171.9 KB · Views: 121
First take the carbs back off the bike and get a straight on shot of the linkage setup, its off to the side and hard to see how it actually all lines up. the bracket just to the left of the cable guide is bent but hard to see if anything else is in this photo. I know it wouldnt be right but if all else fails and the linkage works free you can tweak the cable bracket to get it close to aligned. More pictures straight on would help though.
 
Back
Top