• Enter the March CB750 Supply gift certificate giveaway! It's easy... Click here, post something, and you're entered into the drawing!

Vapor blasting service

Skyguy

CB750 Member
Messages
14
Reaction score
0
Points
1
Location
Las Vegas
Hi,
I have a closed loop vapor blast system and have been doing business locally, (Las Vegas, NV. USA.) I thought I’d reach out to this CB750 community into and offer a unique service to the members. Send your aluminum parts and I can do vapor blasting that will renew them. I use an anti corrosion in my tank and use a CRC coating spray that will keep them looking good. Any aluminum part will look amazing and I can do ferrous and non-ferrous metal as well. Unlike dry blasting, (sand, aluminum oxide,) vapor blasting will not remove material and does not embed into the material. The process uses very high pressure water & super small glass beads.
Note: Vapor blasting WILL NOT remove grease or paint. So all parts should be clean of paint and grease. Prices vary but I will charge CB750 members a discounted rate of $60 per hour, *Normal rate is $120/hr. Typically, a set of 3 carbs to be cleaned externally is 30-40 minutes tops. To have me clean refurbish carbs internally and vapor blast finish, (using existing jets, no carb kits) will take about 2.0 - 2.5 hours. I can give estimates if you send pictures of parts. Please feel free to ask and questions and contact me via e-mail.
willadler737@yahoo.com
I will do my best to give an accurate estimate and let you know the process. Shipping is paid by the customer both ways. thanks in advance,

William Adler

*Video of process :
 

Attachments

  • 280711485_1903795529819299_1587207968255340336_n.jpg
    280711485_1903795529819299_1587207968255340336_n.jpg
    102.4 KB · Views: 122
  • 280749155_1903795726485946_6040481187771364713_n.jpg
    280749155_1903795726485946_6040481187771364713_n.jpg
    401.7 KB · Views: 114
  • IMG_2643.jpeg
    IMG_2643.jpeg
    64.6 KB · Views: 116
  • IMG_2697 (1).jpeg
    IMG_2697 (1).jpeg
    54 KB · Views: 124
  • IMG_3506.jpeg
    IMG_3506.jpeg
    31 KB · Views: 126
  • IMG_3562 (1).jpeg
    IMG_3562 (1).jpeg
    91.7 KB · Views: 125
  • IMG_3999.jpeg
    IMG_3999.jpeg
    86.3 KB · Views: 115
  • IMG_4872.jpeg
    IMG_4872.jpeg
    89.4 KB · Views: 122
Last edited:
Hi, my name is Bryan. I'm looking to have a few motorcycle parts vapor blasted. Is there a phone number I could call for a quote and availability. My number is (619)733-7192
 
Back
Top