• The software has been updated. Message Travis if you find any issues.

Shoter throttle pull

surveywaters

CB750 Member
Messages
6
Reaction score
0
Points
1
Location
SC
I have a '78 750k and I'd like a shorter roll on the throttle. Currently I have to over reach the grip to be able to roll it all the way on. I don't need a 1/4 turn just better than stock while retaining the OEM switrch housing.
 
I have a '78 750k and I'd like a shorter roll on the throttle. Currently I have to over reach the grip to be able to roll it all the way on. I don't need a 1/4 turn just better than stock while retaining the OEM switrch housing.

You cut a plastic wire/cable tie and glue it to your throttle grip under the cable. This effectively lessens the distance you need to turn the throttle to achieve full rotation. Did I explain that correctly?
 
You cut a plastic wire/cable tie and glue it to your throttle grip under the cable. This effectively lessens the distance you need to turn the throttle to achieve full rotation. Did I explain that correctly?

Search eBay item #142508135011.
Arrives in 2 weeks and works well.


Sent from my iPad
 
Back
Top