Shoei saddlebags installation

Jarrett_Honda

CB750 Member
Messages
29
Reaction score
0
Points
1
Location
Spokane, Wa
Does anyone have experience installing these bags on a CB750? I was able to attach it to the two bolts that go through the rear turn signals and grab rail just fine. It's the bottom support bracket that's the issue. The plan was to attach the bracket using the bolt that hold the exhaust and passenger foot pegs on. However that bolt is too big.

I suppose I could mount the bracket to the bottom bolt for the shocks but I'm thinking that would be bad if it limits the up and down movement of the swing arm.
50540bdc07421451e4035694214b2a1c.jpg
e81d91a8c9e832e4548d457b95e2bb8f.jpg


Sent from my SM-N950U using Tapatalk
 

amc49

CB750 Guru
Messages
3,476
Reaction score
17
Points
36
Location
Fort Worth TX.
That last lower link likely goes much more up/down than sideways, it will support better that way. The way you are trying to do it loses leverage and the link is not long enough anyway.

Do NOT put it on the bottom of shock, dangerous to do so!
 
Top