Replacement connector plugs? ('92 cb750 Nighthawk)

[PeterC]

Ok, this feels like a stupid question but while I have no trouble finding replacement parts, I have no clue what the right connector plugs are or where to get replacements. While I'm not entirely sure what shorted to cause this plug to melt, this is the plug connecting the ignition switch. Does anyone know where to get these types of plugs and what the right type of plug is?

('92 cb750 Nighthawk)

 

[brettp]

I bought a set of electrical connections via Amazon. They are not as thick/robust/sturdy as OEM but they work. And the kit had 2 pin, 3 pin, 4 pin, and bigger connections. You will need to buy the crimping pliers too.

There is probably a site that sells better connections, too. More like OEM. but I never looked.

 

[PeterC]

I bought a set of electrical connections via Amazon. They are not as thick/robust/sturdy as OEM but they work. And the kit had 2 pin, 3 pin, 4 pin, and bigger connections. You will need to buy the crimping pliers too.

There is probably a site that sells better connections, too. More like OEM. but I never looked.

I ended up just finding a 2-prong at an auto parts store. Spliced/soldered to the matching wires, wrapped in electrical tape to avoid shorting.