Rear Wheel/Tyre to Ground Clearance when on Centre Stand-CB750K (1979)

[BAHNST]

Hi All,
Wondering if the wire-wheeled CB750K (DOHC) normally has enough clearance to let the rear wheel spin freely on the centre stand?
My bike has standard size rims and tyres but Ikon rear shocks-wheel turns with effort but doesn't spin freely on the centre stand without some wood/blocking under it-easily fixed with some extra metal on the stand; just wanting to know if others have had this issue.

Cheers

 

[user8086]

Yes

 

[BAHNST]

Thanks for the response.....Did you mean "Yes" same problem?....or "Yes" wheel spins freely..

 

[user8086]

Yes,the wheel should spin freely.

 

[BAHNST]

Thanks...cant see anything obvious-might just need to weld a little bit of flat bar...maybe 4mm to solve it..

Cheers

 

[user8086]

What size are the shocks.. that would be the only diference that there would be..stock shocks are around 13-1/2 center to center..

 

[BAHNST]

Spec sheet (for the Ikon) indicates 13.4"...so not longer..

 

[user8086]

Here is a picture of my 1980 750f super sport,comstar rims,stock tire size..there is at least a inch of room..