K3 no front brakes

[ewanmx23]

I’m getting really frustrated with the front brake on my bike. Originally I took the calliper apart and cleaned it because it was seized. Got it all working again but even with the brakes bled I could squeeze the lever, with a lot of pressure but no braking power. So I just replaced the pads. The rotor is fine. Now it’s better, but there is still very little braking power. The only indication I have that anything is wrong is a small deposit of brake fluid I found sitting in the groove where the lever meets the master cylinder. Any advice is greatly appreciated, I’m at a loss for what to do next.

 

[hinksy]

You may need to put new seals ( a rebuild kit ) in the master as it sounds like it isnt building pressure in the line

 

[ewanmx23]

Yeah I grabbed a master cylinder off a parts bike that is working great so far. Thanks for replying