Electrical lighting problem

[Xanthochroic]

I'm hoping that there are some brighter sparks than me on here (pun intended)!
I've just fitted a new RH handlebar switch assembly. (All 7 wires fitted correctly I think!) With the key at the first position (ignition) all the warning lights are active.
The headlight switch (H position) activates main headlight with high and low beam working but no tail light and no pilot/parking light. Brake light works. All LH switch funtions work.
In 'P' position on the RH bar switch I get no pilot light. When I move the key to the final position I get the pilot light and the tail light.
Any thoughts on what I have missed?

 

[Loki]

When you changed the right hand switch gear did you interfere with anything else?
With the key in the ign position you say all the warning lights are active, do you mean they all light up?
The lights are fed from ignition switched live so can only be on when the ignition is on.
With the key in the park position the tail light and pilot light are both fed from the permanaent live at the ignition switch.
I've just been through this with my latest project so I feel your pain finally found my green earth leads were wrongly connected so I had no earth to the headdlight frame which led to all sorts of fun and games!

Loki.