Dual Piston Caliper Replacement or Compatibility

[nwool05]

I have a 1982 CB750C Custom that needed the brakes bled. While bleeding the brakes, the threads where the bleeder screw goes into were stripped and now the caliper either needs to be replaced or new threads need to be inserted.

I'm wondering if someone can help me navigate finding replacement calipers or maybe if there is another CB750 variant (F, K, etc.) that would work rather than the Custom calipers.

 

[Nylundarn]

I looked up your bike on CMSNL , is this the caliper you have?

https://www.cmsnl.com/honda-cb750c-750-custom-1982-c-usa_model7239/caliper-comp_45101ma3006/

If you scroll down on the product page, you can see all the bikes that had that part from factory.

Hope this helps!

 

[nwool05]

Though the one you sent me was the wrong side, I was able to navigate to the correct side and got one ordered. Thank you so much, this was really starting to get under my skin with how difficult it was to find some bikes that use the same one.

 

[Nylundarn]

Though the one you sent me was the wrong side, I was able to navigate to the correct side and got one ordered. Thank you so much, this was really starting to get under my skin with how difficult it was to find some bikes that use the same one.

No problem!