Broken rhino horn options

[Oldhondas]

Hey hey, I was recently taking my new project apart and the rhino horn clamps just fell apart in my hands. Bike is a 1971 cb750. Due to the fact the rhino is extremely expensive IF you can find one, I plan to either find a billet top clamp or just hang a full new set of trees. Wondering if anyone has info on what years might fit in the head tube or a link to a billet top clamp WITH handlebar holes drilled in them already. Any help would help thanks

 

[Oldhondas]

I’m going with a custom build and don’t need the “horn” just something that will work with my stock forks for steering, fabrication isn’t an issue to a point

 

[dirtdigger]

Any of the sohc 750 triple clamps will fit.

 

[Oldhondas]

Any of the sohc 750 triple clamps will fit.

Is that till 75?

 

[Oldhondas]

Any of the sohc 750 triple clamps will fit.

Do you mean just the top
Clamp or the whole set up?

 

[dirtdigger]

sohc went through 78.

Should be the same geometry between the unicorn and the standard clamp.. I dont have a unicorn clamp anymore but pretty sure I swapped with a standard. The whole setup top and bottom should be cheap on ebay.