AirraidCB750
CB750 New member
Hello, I bought a 1981 cb750c in November. Complete bike, all 4 carbs were together, in a box. Took float bowls off, cleaned everything, replaced a couple jets, all 4 main gaskets and float bowl drain screw o-rings all from Chinese carb rebuild kits that the previous owner had for the bike already. Installed carbs, bike started fine but float bowls are leaking from drain screws and main gaskets and one of the brass screws near float bowls. I'm assuming, based on my very limited knowledge, that the cheap gaskets and o-rings are bad. But what about the brass screw near the bowl? Thanks for the help.