'79 CB750F super sport / DOHC -- replacement rear brake master cylinder

Luis Etchenique

'79 CB750F Super Sport
Messages
33
Reaction score
0
Points
6
Location
South Ponte Vedra Beach, Florida
hello CB750 friends -

in the proces of resto-modifying ( into a race replica ) my CB750F s/s, like most of the bike ... the rear brake's master cylinder is completely gone -- I had to cut it off from the footpeg brackets, since it was welded by years of galvanic corrosion

so my question is: any recommendation ( s ) on a replacement unit ? ... so far, I have only found re-build kits, but not complete sets

the bike will see minor use and performance is not an issue -- I just want a functional unit

============================

thank you as always for your repeated help !


Luis Etchenique
South Ponte Vedra Beach, Fla.
-USA-
 

fg1972

CB750 Enthusiast
Messages
41
Reaction score
8
Points
8
Location
Australia
Most of those generic ones should work however just check the centre to centre bolt distance against yours if you're not planning to modify the mounting point. I used the below on mine (82 CB750F) which looks very similar to the one you posted except for the bolt spacing distance.
 
Top