Daddyoo
CB750 Member
I have a CB 750 SS I had it up and running a couple years ago after I rebuilt the carbs. Of course, the carbs now need again to to be rebuilt. Started past month and runs fine; however, sitting on a puddle of gas leaking from the carbs. I tore into them a week ago(still look like just rebuilt inside) but not only the float seats, but the carbs are leaking from the "o" rings that join the 4 carbs together. This is more than I want to tackle and I don't know if the carbs have seen their life span.
Also weird situation started before I put the bike up a couple of years ago, where 2nd cylinder was apparently getting flooded and not firing and blowing fuel(white smoke) out the exhaust( could almost touch the exhaust 2nd cylinder manifold ) while the others were burning hot. I did a compression test on cylinders, checked the coils, and the cylinder gets spark, so it has something to do with the carbs, I figure.
Looking for an experienced Honda carb rebuilder who wants to tear them apart and rebuild(that is reasonable$$). Any recommendations and Phone numbers would be appreciated.
Thanks
Also weird situation started before I put the bike up a couple of years ago, where 2nd cylinder was apparently getting flooded and not firing and blowing fuel(white smoke) out the exhaust( could almost touch the exhaust 2nd cylinder manifold ) while the others were burning hot. I did a compression test on cylinders, checked the coils, and the cylinder gets spark, so it has something to do with the carbs, I figure.
Looking for an experienced Honda carb rebuilder who wants to tear them apart and rebuild(that is reasonable$$). Any recommendations and Phone numbers would be appreciated.
Thanks
